Ransomware: how to remove it, even when the computer does not boot?

Ransomware: how to remove it, even when the computer does not boot?

Ransomware: how to remove it, even when the computer does not boot?

We have recently published an article (in Polish) about ransomware malware (mainly WeelsOf) spreading in Poland. This kind of ransomware was initally mentioned on the blog: It demands 100 Euro or 500 PLN in order to unlock our computer. We also published a UKash code generator that was suppose to fool malware and unlock our computer. Since then, we have encountered versions of this ransomware that simply did not unlock the computer no matter what kind of code was submitted. Below, we have compiled a few tips, both for advanced users and beginners, on how to remove ransomware, or malware in general. They should work even in cases when the computer will not boot.

Malware very often adds itself to the list of applications that start when operating system boots up. By doing so, it makes sure that when a user removes it during the system run, it will infect the machine again at another boot. The only solution is to prevent software from running at system start.

Below we present two methods of malware removal. The first one is to try and run the computer in safe mode and then use a free tool to inspect our system. The other one is to run the computer from a Rescue CD provided by one of the antivirus vendors. This is a method that one of our readers checked and recommended.


METHOD 1: SysInternals Autoruns and Safe Boot

Firstly, we should prepare an USB disk with unpacked SysInternals Autoruns (it is available from Microsoft: On this USB drive we should have four files:



Safe Mode with Command Prompt

First thing to do when our computer does not boot up is to try to run it in Safe Mode with Command Prompt (not in the regular Safe Mode – this may not work!). We do this by switching on the computer and pressing F8 just when Windows starts (before the boot up logo). Next, using arrows, we choose the “Safe Mode with Command Prompt” option.



After running the computer in Safe Mode with Command Prompt we will see a screen similar to the ones below (left is Windows XP, and on the right is Windows 7):



Windows XP
Windows 7

Next we should plug in the USB drive prepared before. Because we do not have access to the graphical interface, we must identify the USB drive letter from a command line. To do this, we issue a command:

wmic logicaldisk get caption,volumename

In this case the USB drive is present under the letter E.

Now we write that letter with a colon. In our case, the USB drive is associated with the letter E, so we write E: and press [ENTER] just like we can see on a picture below:


Now, we should run the application copied to the USB drive by typing Autoruns.exe and pressing the [ENTER] key.
After this, we should see the main windows of the autoruns tool. This should be similiar to the picture presented below:

As we can see, this application is very complex. It lists all the autorun entries it could find on our machine. We will be only interested in two tabs, on which we can find places in which malware usually resides, namely: Logon and Scheduled Tasks.



Identification and removal of malware

In order to narrow down the list of suspicious entries, we should turn off all entries associated with Windows or Microsoft software in general. In order to do so, we must click on the Options menu and choose Hide Microsoft and Windows Entries (you can see it on a picture on the right).

One of the most standing out features of the malware is the file location (column Image path). If this entry starts with C:\Documents and settings\..., we can with a high probability state, that this is indeed a piece of malware. Another feature is the name of the entry (first column, named Autorun entry). Malware often uses random file names. For example, we can see ransomware entries in the picture below. They are labelled with [ 3 ] and [ 4 ]. After locating these entries we can deactivate the entry by clicking on a box (marked with [ 2 ]) or remove it permanently by clicking on a [ 1 ]. WARNING: If we are not sure about our identification, we should always deactive the entry, rather than remove it. The effect will be the same – application will not run during the next reboot. However, if we deactive the entry, we can activate it again in a later time, if it was a benign application.


Where to look for a virus?

Other places that are most commonly used by malware are:

In a tab called Logon :
Benign entry in a SHELL key:

After being infected by malware this entry looks like in the picture below:

Another example: two entries in the USERINIT key, the green one is a benign entry while the red one is created by malware:

The last example is the Scheduled Tasks tab:


METHOD 2: Rescue CD with antivirus

Many antivirus vendors create and freely distribute Rescue CDs, which allow users to run their computer with an alternative operating system. After such an operation, we can scan our system for any malware that is present in the antivirus database. On these CDs we can also find other useful tools, e.g. registry editor. If we do not have the CD/DVD writer, we can download a version crafted specifically for the USB drive. Couple of the most popular such solutions are:

One of our readers informed us about the easiness of use of the CD provided by Kaspersky. Because it is indeed a very user-friendly and graphical solution, we decided to use it for this description. It should be noted that all of the aforementioned solutions provide the same basic functionalities, hence it usually does not matter which CD we will use.


If we have a CD/DVD burner, we can simply download an ISO image (using the links provided above) and write it to the CD. We must make sure that we choose to record a CD from the ISO image. Then, we should be able to run our machine using the alternative operating system from the CD.
If we do not have a CD/DVD burner, we can use an USB drive. In order to do so, we should download a tool provided by Kaspersky, that lets us record an ISO image to the USB drive (we can find it here: rescue2usb.exe). After we run the downloaded tool, we should choose (using the “Browse…” button) previously downloaded ISO image. Then, from the presented list, we should choose a USB drive letter. We should be aware that all of the data present on the USB drive will be removed. That is why we should double check that we have chosen the correct letter.
Next, we press the “START” button and accept the warning saying that all of the data will be removed. After a couple of seconds we should have a USB drive that will be able to boot our computer and remove the malware.

Boot Up

After the computer has run, we should press one of the keys that will bring up the “Boot Menu” or the BIOS settings. One of the most commonly used keys are:

  • Delete
  • F2
  • F1
  • F8
  • F10
  • F11
  • F12

Of course, there are other key combinations used for this. To get the detailed instruction, we should look in our motherboard manual. Next we go to the “Boot” tab (if we are in BIOS) and choose a CD/DVD (if we recorded a disk) option or the “Removable Drive” option (if we wrote data to the USB drive).


After the boot up, we must press a key within a 10 seconds. Then we should choose a language (”English”, of course) and press Enter. Next, we should accept the License Agreement by pressing “1″. On the next screen we choose “Kaspersky Rescue Disk. Graphic Mode” option and, after a short start up procedure, we should see a screen similar to the one presented below. We should move to the “My Update Center” tab.


On this tab, we click the button labeled “Start Update” and, after some time when the progress reaches 100%, we receive an information that our virus database has been updated less than a minute ago. We now move to the “Objects Scan” tab and mark all scan targets and press “Start objects scan”.

After some time, which depends mainly on the speed of our machine, we should receive an information similar to the one presented on the left. It should be present in the lower right corner of our screen. We then choose an options labeled “recommended” (which in this case is “Delete”). We do this with every threat that we are informed about. Scanning process should end, and we should see the information that our computer was scanned less than a minute ago. It means that our computer should be free of any malware and we can restart it. We do this by clicking on the “K” letter (which should look something like this: ) in the lower left corner of the screen and click the “Restart” option. We click “Yes” approving that we want to restart our computer. We should remember either to remove the CD when the machine restarts or not to press any button until we see the Windows login screen. Our machine should work normally and we should not be blocked by any ransomware.


When nothing works

The methods described above should, in most cases, allow us to remove the malware from our computer. However, if this is not the case, or we are afraid that we can lose valuable data, we recommend contacting a specialized computer service that should be able to remove the infection.


Article Source: CERT POLSKA


© 2011-2024 All rights reserved